Chicco You&Me Instruction for Use download pdf (Page 25)

1. Insert the arms into the two shoulder straps

openings, one at a time (diag. 1).

2. Adjust the length of the shoulder straps,

holding the main adjustment straps. Pull

the straps, ensuring they adhere correctly

to the shoulders (diag. 2). This operation

adjusts the upper rear part of the backrest.

3. Hold both lower buckles with the right

hand, and pull the secondary adjustment

straps with the other hand (diag. 3), ensur-

ing that the backrest adheres correctly to

the bust. Repeat the same operation on

the other side. This operation adjusts the

lower rear part of the backrest.

4. To ensure maximum comfort while carrying

the child, the Ergo System backrest must

be placed in a central position, slightly be-

low the shoulder blades (diag. 4): it should

adhere correctly to the back and lumbar

region of the adult to ensure maximum

comfort.

GROWTH ADJUSTMENT SYSTEM

WARNING: This operation must be carried out

before placing the child in the baby carrier.

The baby carrier has a special growth adjust-

ment system that allows you to adjust the

baby carrier to suit the child’s development.

5. Open the two zips, as shown in diag. 5.

6. Hold the height adjustment buckle and pull

the strap, until the baby carrier is adjusted

to the desired size (diag. 6).

7. Close the panel again at the end of the op-

eration (diag. 7).

Information for parents: Some sizes/heights

are indicated near the height adjustment

buckle of the baby carrier, in order to make the

adjustment operations easier.

WARNING: Before placing the child in the

baby carrier, ensure that the adjustment buck-

le is fastened correctly into position.

HOW TO FIT THE BABY CARRIER TO THE

SHOULDER STRAPS

8. To ﬁ t the baby carrier to the shoulder straps,

it is necessary to hold the lower buckles of

the shoulder straps and fasten them to the

corresponding lower open/close buckles of

the baby carrier (diag. 8).

WARNING: Exercise pressure until a “clack” is

heard, indicating that the buckle is fastened

correctly into position.

9. Adjust the length of the shoulder straps,

one at a time, adjusting the secondary

adjustment straps, until the baby carrier is

closely positioned against the upper part of

the adult’s thorax (diag. 9). This operation

is necessary to ensure maximum comfort

for the adult and the child and to distrib-

ute the weight in the best way, so ensuring

maximum safety for the child.

ADJUSTMENT SYSTEM FOR THE PARENT’S

BODY

WARNING: This operation must be carried out

before placing the child into the baby carrier.

The baby carrier has an adjustment system

that ensures maximum comfort and the best

adjustment to any type of body size.

10. Hold the two ends of the upper open/clo-

se buckle with the ﬁ ngertips and exercise a

slight pressure on the sides to unfasten the

buckle (diag. 10).

11. Raise the tab to release it from its position

of use (diag. 11).

12. Slide the buckle set into the appropriate

guide, until the desired height is reached

(diag. 12).

13. Lower the buckle, and exercise a slight

pressure on the side of the tabs to fasten

the buckle again in its safety position (diag.

13).

Both shoulder straps must be adjusted exactly

at the same height.

14. To carry the child in a correct and safe posi-

tion, the adjustment buckle must be posi-

tioned as shown in diagram 14.

WARNING: Always check that the buckle is

fastened correctly before carrying out any

other operations. It will be impossible to ﬁ t

the baby carrier to the shoulder straps if this

adjustment operation has not been carried out

correctly and the tabs are not ﬁ tted correctly

into position.

HOW TO PLACE BABY INSIDE THE BABY

CARRIER

It is recommended that you place the child in

the baby carrier while sitting.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 63 64

Comments to this Manuals

No comments

Chicco You&Me Instruction for Use Page 25

Comments to this Manuals

Related products and manuals for Baby carriers Chicco You&Me